dmesg - VIRTUAL DISK - 2048 MB DDR3-1333MHz

Return To VIRTUAL DISK - 2048 MB DDR3-1333MHz System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-45-generic (buildd@lgw01-23) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #60~14.04.1-Ubuntu SMP Fri Jul 24 21:16:23 UTC 2015 (Ubuntu 3.16.0-45.60~14.04.1-generic 3.16.7-ckt14)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000bf698fff] usable
BIOS-e820: [mem 0x00000000bf699000-0x00000000bf6aefff] reserved
BIOS-e820: [mem 0x00000000bf6af000-0x00000000bf6cdfff] ACPI data
BIOS-e820: [mem 0x00000000bf6ce000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Dell Inc. PowerEdge T110/0V52N7, BIOS 1.10.0 09/10/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-CFFFF write-back
  D0000-D3FFF write-protect
  D4000-EBFFF uncachable
  EC000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 080000000 mask FC0000000 write-back
  2 base 100000000 mask FC0000000 write-back
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf699 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ffff8800000fe710]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000096000] 96000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fbd000, 0x01fbdfff] PGTABLE
BRK [0x01fbe000, 0x01fbefff] PGTABLE
BRK [0x01fbf000, 0x01fbffff] PGTABLE
init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
 [mem 0x13fe00000-0x13fffffff] page 2M
BRK [0x01fc0000, 0x01fc0fff] PGTABLE
init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
 [mem 0x13c000000-0x13fdfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x13bffffff]
 [mem 0x100000000-0x13bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbf698fff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0xbf5fffff] page 2M
 [mem 0xbf600000-0xbf698fff] page 4k
RAMDISK: [mem 0x35a94000-0x36d41fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F1230 000024 (v02 DELL  )
ACPI: XSDT 0x00000000000F1330 000094 (v01 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: FACP 0x00000000BF6C3BB4 0000F4 (v03 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: DSDT 0x00000000BF6AF000 003A02 (v01 DELL   PE_SC3   00000001 INTL 20050624)
ACPI: FACS 0x00000000BF6C6000 000040
ACPI: APIC 0x00000000BF6C3478 000152 (v01 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: SPCR 0x00000000BF6C35CC 000050 (v01 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: HPET 0x00000000BF6C3620 000038 (v01 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: DMAR 0x00000000BF6C365C 0000A8 (v01 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: MCFG 0x00000000BF6C3850 00003C (v01 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: WD__ 0x00000000BF6C3890 000134 (v01 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: SLIC 0x00000000BF6C39C8 000024 (v01 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: ERST 0x00000000BF6B2B84 000270 (v01 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: HEST 0x00000000BF6B2DF4 0003A8 (v01 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: BERT 0x00000000BF6B2A04 000030 (v01 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: EINJ 0x00000000BF6B2A34 000150 (v01 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: TCPA 0x00000000BF6C3B4C 000064 (v02 DELL   PE_SC3   00000001 DELL 00000001)
ACPI: SSDT 0x00000000BF6C7000 0011C4 (v01 INTEL  PPM RCM  80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
Initmem setup node 0 [mem 0x00000000-0x13fffffff]
  NODE_DATA [mem 0x13fff8000-0x13fffcfff]
 [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x13fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009bfff]
  node   0: [mem 0x00100000-0xbf698fff]
  node   0: [mem 0x100000000-0x13fffffff]
On node 0 totalpages: 1046068
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3995 pages, LIFO batch:0
  DMA32 zone: 12187 pages used for memmap
  DMA32 zone: 779929 pages, LIFO batch:31
  Normal zone: 4096 pages used for memmap
  Normal zone: 262144 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x24] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x25] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x26] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x27] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 32 CPUs, 28 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009c000-0x000fffff]
PM: Registered nosave memory: [mem 0xbf699000-0xbf6aefff]
PM: Registered nosave memory: [mem 0xbf6af000-0xbf6cdfff]
PM: Registered nosave memory: [mem 0xbf6ce000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xffffffff]
e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:32 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88013b200000 s81408 r8192 d20992 u131072
pcpu-alloc: s81408 r8192 d20992 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1029700
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 4013596K/4184272K available (7629K kernel code, 1131K rwdata, 3616K rodata, 1352K init, 1300K bss, 170676K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=32.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-31.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS:16640 nr_irqs:936 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2393.905 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.81 BogoMIPS (lpj=9575620)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ftrace: allocating 29259 entries in 115 pages
dmar: Host address width 36
dmar: DRHD base: 0x000000fed50000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed50000 ver 1:0 cap c90780106b0462 ecap f020e2
dmar: RMRR base: 0x000000bf7c8000 end: 0x000000bf7dffff
dmar: RMRR base: 0x000000bf7c0000 end: 0x000000bf7c0fff
dmar: RMRR base: 0x000000bf7c2000 end: 0x000000bf7c2fff
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU           X3430  @ 2.40GHz (fam: 06, model: 1e, stepping: 05)
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
perf_event_intel: CPU erratum AAJ80 worked around
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
x86: Booting SMP configuration:
.... node  #0, CPUs:        #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
  #2  #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (19151.24 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 11:47:22, date: 08/14/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: PCIe AER handled by firmware
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfdffffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci 0000:00:00.0: [8086:d130] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:d13a] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xdf4fa000-0xdf4fa3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xdf4fc000-0xdf4fc3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3b14] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xccd0-0xccd7]
pci 0000:00:1f.2: reg 0x14: [io  0xccc8-0xcccb]
pci 0000:00:1f.2: reg 0x18: [io  0xccd8-0xccdf]
pci 0000:00:1f.2: reg 0x1c: [io  0xcccc-0xcccf]
pci 0000:00:1f.2: reg 0x20: [io  0xcce0-0xccff]
pci 0000:00:1f.2: reg 0x24: [mem 0xdf4fe000-0xdf4fe7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:01:00.0: [1077:2432] type 00 class 0x0c0400
pci 0000:01:00.0: reg 0x10: [io  0xf800-0xf8ff]
pci 0000:01:00.0: reg 0x14: [mem 0xdf5f8000-0xdf5fbfff 64bit]
pci 0000:01:00.0: reg 0x30: [mem 0xdf500000-0xdf53ffff pref]
pci 0000:01:00.1: [1077:2432] type 00 class 0x0c0400
pci 0000:01:00.1: reg 0x10: [io  0xfc00-0xfcff]
pci 0000:01:00.1: reg 0x14: [mem 0xdf5fc000-0xdf5fffff 64bit]
pci 0000:01:00.1: reg 0x30: [mem 0xdf500000-0xdf53ffff pref]
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0:   bridge window [io  0xf000-0xffff]
pci 0000:00:03.0:   bridge window [mem 0xdf500000-0xdf5fffff]
pci 0000:02:00.0: [1000:0058] type 00 class 0x010000
pci 0000:02:00.0: reg 0x10: [io  0xec00-0xecff]
pci 0000:02:00.0: reg 0x14: [mem 0xdf7ec000-0xdf7effff 64bit]
pci 0000:02:00.0: reg 0x1c: [mem 0xdf7f0000-0xdf7fffff 64bit]
pci 0000:02:00.0: reg 0x30: [mem 0xdf600000-0xdf6fffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:00:05.0: PCI bridge to [bus 02]
pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:05.0:   bridge window [mem 0xdf600000-0xdf7fffff]
pci 0000:03:00.0: [8086:10c9] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xdebc0000-0xdebdffff]
pci 0000:03:00.0: reg 0x14: [mem 0xdec00000-0xdeffffff]
pci 0000:03:00.0: reg 0x18: [io  0xdcc0-0xdcdf]
pci 0000:03:00.0: reg 0x1c: [mem 0xdebb8000-0xdebbbfff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.1: [8086:10c9] type 00 class 0x020000
pci 0000:03:00.1: reg 0x10: [mem 0xdebe0000-0xdebfffff]
pci 0000:03:00.1: reg 0x14: [mem 0xdf000000-0xdf3fffff]
pci 0000:03:00.1: reg 0x18: [io  0xdce0-0xdcff]
pci 0000:03:00.1: reg 0x1c: [mem 0xdebbc000-0xdebbffff]
pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
pci 0000:03:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.0:   bridge window [mem 0xde800000-0xdf3fffff]
pci 0000:00:1c.0: bridge has subordinate 03 but max busn 04
pci 0000:04:00.0: [14e4:165a] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [mem 0xdf8f0000-0xdf8fffff 64bit]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4:   bridge window [mem 0xdf800000-0xdf8fffff]
pci 0000:00:1c.5: PCI bridge to [bus 05]
pci 0000:06:03.0: [102b:0532] type 00 class 0x030000
pci 0000:06:03.0: reg 0x10: [mem 0xdd000000-0xdd7fffff pref]
pci 0000:06:03.0: reg 0x14: [mem 0xddffc000-0xddffffff]
pci 0000:06:03.0: reg 0x18: [mem 0xde000000-0xde7fffff]
pci 0000:06:03.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xdd800000-0xde7fffff]
pci 0000:00:1e.0:   bridge window [mem 0xdd000000-0xdd7fffff 64bit pref]
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfdffffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 *14 15)
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: Enabled 1 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:06:03.0
vgaarb: device added: PCI:0000:06:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:06:03.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus ff
PCI: root bus ff: using default resources
PCI: Probing PCI hardware (bus ff)
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [io  0x0000-0xffff]
pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
pci 0000:ff:00.0: [8086:2c50] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2c81] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2c90] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2c91] type 00 class 0x060000
pci 0000:ff:03.0: [8086:2c98] type 00 class 0x060000
pci 0000:ff:03.1: [8086:2c99] type 00 class 0x060000
pci 0000:ff:03.2: [8086:2c9a] type 00 class 0x060000
pci 0000:ff:03.4: [8086:2c9c] type 00 class 0x060000
pci 0000:ff:04.0: [8086:2ca0] type 00 class 0x060000
pci 0000:ff:04.1: [8086:2ca1] type 00 class 0x060000
pci 0000:ff:04.2: [8086:2ca2] type 00 class 0x060000
pci 0000:ff:04.3: [8086:2ca3] type 00 class 0x060000
pci 0000:ff:05.0: [8086:2ca8] type 00 class 0x060000
pci 0000:ff:05.1: [8086:2ca9] type 00 class 0x060000
pci 0000:ff:05.2: [8086:2caa] type 00 class 0x060000
pci 0000:ff:05.3: [8086:2cab] type 00 class 0x060000
pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]
e820: reserve RAM buffer [mem 0xbf699000-0xbfffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 40 for MSI
hpet: hpet3 irq 41 for MSI
hpet: hpet4 irq 42 for MSI
hpet: hpet5 irq 43 for MSI
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:04: [io  0x0800-0x087f] could not be reserved
system 00:04: [io  0x0880-0x08ff] has been reserved
system 00:04: [io  0x0900-0x091f] has been reserved
system 00:04: [io  0x0920-0x0923] has been reserved
system 00:04: [io  0x0924] has been reserved
system 00:04: [io  0x0ca0-0x0ca7] has been reserved
system 00:04: [io  0x0ca9-0x0cab] has been reserved
system 00:04: [io  0x0cad-0x0caf] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:05: [irq 0 disabled]
system 00:05: [io  0x0ca8] has been reserved
system 00:05: [io  0x0cac] has been reserved
system 00:05: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active)
pnp 00:06: [irq 0 disabled]
system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfed50000-0xfed53fff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
pci 0000:01:00.1: can't claim BAR 6 [mem 0xdf500000-0xdf53ffff pref]: address conflict with 0000:01:00.0 [mem 0xdf500000-0xdf53ffff pref]
pci_bus 0000:00: max bus depth: 1 pci_try_num: 2
pci 0000:01:00.1: BAR 6: assigned [mem 0xdf540000-0xdf57ffff pref]
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0:   bridge window [io  0xf000-0xffff]
pci 0000:00:03.0:   bridge window [mem 0xdf500000-0xdf5fffff]
pci 0000:00:05.0: PCI bridge to [bus 02]
pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:05.0:   bridge window [mem 0xdf600000-0xdf7fffff]
pci 0000:03:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.0: BAR 7: assigned [mem 0xde800000-0xde81ffff 64bit]
pci 0000:03:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.0: BAR 10: assigned [mem 0xde820000-0xde83ffff 64bit]
pci 0000:03:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.1: BAR 7: assigned [mem 0xde840000-0xde85ffff 64bit]
pci 0000:03:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.1: BAR 10: assigned [mem 0xde860000-0xde87ffff 64bit]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.0:   bridge window [mem 0xde800000-0xdf3fffff]
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4:   bridge window [mem 0xdf800000-0xdf8fffff]
pci 0000:00:1c.5: PCI bridge to [bus 05]
pci 0000:06:03.0: BAR 6: assigned [mem 0xdd800000-0xdd80ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 06]
pci 0000:00:1e.0:   bridge window [mem 0xdd800000-0xde7fffff]
pci 0000:00:1e.0:   bridge window [mem 0xdd000000-0xdd7fffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfdffffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: resource 0 [io  0xf000-0xffff]
pci_bus 0000:01: resource 1 [mem 0xdf500000-0xdf5fffff]
pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xdf600000-0xdf7fffff]
pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xde800000-0xdf3fffff]
pci_bus 0000:04: resource 1 [mem 0xdf800000-0xdf8fffff]
pci_bus 0000:06: resource 1 [mem 0xdd800000-0xde7fffff]
pci_bus 0000:06: resource 2 [mem 0xdd000000-0xdd7fffff 64bit pref]
pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:06: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 7 [mem 0xc0000000-0xfdffffff]
pci_bus 0000:06: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:ff: resource 4 [io  0x0000-0xffff]
pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:06:03.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19128K (ffff880035a94000 - ffff880036d42000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbb699000-0xbf699000] (64MB) mapped at [ffff8800bb699000-ffff8800bf698fff]
microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x7
microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x7
microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x7
microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x7
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 8192 (order: 7, 524288 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1439552842.500:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
msgmni has been set to 7876
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:03.0: device [8086:d138] has invalid IRQ; check vendor BIOS
pcieport 0000:00:03.0: irq 45 for MSI/MSI-X
pcieport 0000:00:05.0: device [8086:d13a] has invalid IRQ; check vendor BIOS
pcieport 0000:00:05.0: irq 46 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 47 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 48 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 49 for MSI/MSI-X
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xdd000000, mapped to 0xffffc90010800000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1E
intel_idle: lapic_timer_reliable_states 0x2
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 22, io mem 0xdf4fa000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-45-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 22, io mem 0xdf4fc000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-45-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
usb 1-1: new high-speed USB device number 2 using ehci-pci
i8042: No controller found
tsc: Refined TSC clocksource calibration: 2393.985 MHz
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: c1a31edb9fc4c64e2d95a7ff18a673d18cab15a6'
registered taskstats version 1
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
  Magic number: 11:465:782
rtc_cmos 00:01: setting system clock to 2015-08-14 11:47:24 UTC (1439552844)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
usb 2-1: new high-speed USB device number 2 using ehci-pci
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1352K (ffffffff81d1c000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 552K (ffff880001776000 - ffff880001800000)
Freeing unused kernel memory: 480K (ffff880001b88000 - ffff880001c00000)
systemd-udevd[171]: starting version 204
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
Fusion MPT SAS Host driver 3.04.20
qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.08-k.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 50 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part ems sxs apst 
tg3.c:v3.137 (May 11, 2014)
dca service started, version 1.12.1
mptbase: ioc0: Initiating bringup
qla2xxx [0000:01:00.0]-001d: : Found an ISP2432 irq 16 iobase 0xffffc900107aa000.
tg3 0000:04:00.0 eth0: Tigon3 [partno(BCM95722) rev a200] (PCI Express) MAC address bc:30:5b:cf:e8:5d
tg3 0000:04:00.0 eth0: attached PHY is 5722/5756 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:04:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:04:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
ata1: SATA max UDMA/133 abar m2048@0xdf4fe000 port 0xdf4fe100 irq 50
ata2: SATA max UDMA/133 abar m2048@0xdf4fe000 port 0xdf4fe180 irq 50
ata3: SATA max UDMA/133 abar m2048@0xdf4fe000 port 0xdf4fe200 irq 50
ata4: SATA max UDMA/133 abar m2048@0xdf4fe000 port 0xdf4fe280 irq 50
ata5: SATA max UDMA/133 abar m2048@0xdf4fe000 port 0xdf4fe300 irq 50
ata6: SATA max UDMA/133 abar m2048@0xdf4fe000 port 0xdf4fe380 irq 50
qla2xxx 0000:01:00.0: irq 51 for MSI/MSI-X
qla2xxx 0000:01:00.0: irq 52 for MSI/MSI-X
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.13-k
igb: Copyright (c) 2007-2014 Intel Corporation.
igb 0000:03:00.0: irq 53 for MSI/MSI-X
igb 0000:03:00.0: irq 54 for MSI/MSI-X
igb 0000:03:00.0: irq 55 for MSI/MSI-X
igb 0000:03:00.0: irq 56 for MSI/MSI-X
igb 0000:03:00.0: irq 57 for MSI/MSI-X
igb 0000:03:00.0: irq 58 for MSI/MSI-X
igb 0000:03:00.0: irq 59 for MSI/MSI-X
igb 0000:03:00.0: irq 60 for MSI/MSI-X
igb 0000:03:00.0: irq 61 for MSI/MSI-X
usb 2-1.4: new low-speed USB device number 3 using ehci-pci
igb 0000:03:00.0: irq 53 for MSI/MSI-X
igb 0000:03:00.0: irq 54 for MSI/MSI-X
igb 0000:03:00.0: irq 55 for MSI/MSI-X
igb 0000:03:00.0: irq 56 for MSI/MSI-X
igb 0000:03:00.0: irq 57 for MSI/MSI-X
igb 0000:03:00.0: irq 58 for MSI/MSI-X
igb 0000:03:00.0: irq 59 for MSI/MSI-X
igb 0000:03:00.0: irq 60 for MSI/MSI-X
igb 0000:03:00.0: irq 61 for MSI/MSI-X
usb 2-1.4: New USB device found, idVendor=050d, idProduct=0119
usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.4: Product: USB-PS2 Adapter 
usb 2-1.4: Manufacturer: Belkin Components
hidraw: raw HID events driver (C) Jiri Kosina
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
scsi0 : qla2xxx
qla2xxx [0000:01:00.0]-00fb:0: QLogic QLE2462 - SG-(X)PCIE2FC-QF4, Sun StorageTek 4 Gb FC Enterprise PCI-Express Dual Channel H.
qla2xxx [0000:01:00.0]-00fc:0: ISP2432: PCIe (2.5GT/s x4) @ 0000:01:00.0 hdma+ host#=0 fw=7.01.00 (9496).
qla2xxx [0000:01:00.1]-001d: : Found an ISP2432 irq 17 iobase 0xffffc900107ce000.
qla2xxx 0000:01:00.1: irq 62 for MSI/MSI-X
qla2xxx 0000:01:00.1: irq 63 for MSI/MSI-X
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Belkin Components USB-PS2 Adapter  as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:050D:0119.0001/input/input1
hid-generic 0003:050D:0119.0001: input,hidraw0: USB HID v1.00 Keyboard [Belkin Components USB-PS2 Adapter ] on usb-0000:00:1d.0-1.4/input0
input: Belkin Components USB-PS2 Adapter  as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:050D:0119.0002/input/input2
hid-generic 0003:050D:0119.0002: input,hidraw1: USB HID v1.00 Mouse [Belkin Components USB-PS2 Adapter ] on usb-0000:00:1d.0-1.4/input1
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Switched to clocksource tsc
ata5.00: ATAPI: HL-DT-STDVD-ROM DH10N, 0F03, max UDMA/100
systemd-udevd[175]: renamed network interface eth0 to em1
ata5.00: configured for UDMA/100
igb 0000:03:00.0: added PHC on eth0
igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:03:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:1b:21:48:41:52
igb 0000:03:00.0: eth0: PBA No: Unknown
igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
igb 0000:03:00.1: irq 64 for MSI/MSI-X
igb 0000:03:00.1: irq 65 for MSI/MSI-X
igb 0000:03:00.1: irq 66 for MSI/MSI-X
igb 0000:03:00.1: irq 67 for MSI/MSI-X
igb 0000:03:00.1: irq 68 for MSI/MSI-X
igb 0000:03:00.1: irq 69 for MSI/MSI-X
igb 0000:03:00.1: irq 70 for MSI/MSI-X
igb 0000:03:00.1: irq 71 for MSI/MSI-X
igb 0000:03:00.1: irq 72 for MSI/MSI-X
scsi: waiting for bus probes to complete ...
igb 0000:03:00.1: irq 64 for MSI/MSI-X
igb 0000:03:00.1: irq 65 for MSI/MSI-X
igb 0000:03:00.1: irq 66 for MSI/MSI-X
igb 0000:03:00.1: irq 67 for MSI/MSI-X
igb 0000:03:00.1: irq 68 for MSI/MSI-X
igb 0000:03:00.1: irq 69 for MSI/MSI-X
igb 0000:03:00.1: irq 70 for MSI/MSI-X
igb 0000:03:00.1: irq 71 for MSI/MSI-X
igb 0000:03:00.1: irq 72 for MSI/MSI-X
ioc0: LSISAS1068E B3: Capabilities={Initiator}
scsi7 : qla2xxx
qla2xxx [0000:01:00.1]-00fb:7: QLogic QLE2462 - SG-(X)PCIE2FC-QF4, Sun StorageTek 4 Gb FC Enterprise PCI-Express Dual Channel H.
qla2xxx [0000:01:00.1]-00fc:7: ISP2432: PCIe (2.5GT/s x4) @ 0000:01:00.1 hdma+ host#=7 fw=7.01.00 (9496).
igb 0000:03:00.1: added PHC on eth1
igb 0000:03:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:03:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:1b:21:48:41:53
igb 0000:03:00.1: eth1: PBA No: Unknown
igb 0000:03:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
systemd-udevd[179]: renamed network interface eth1 to p3p2
systemd-udevd[180]: renamed network interface eth0 to p3p1
scsi 5:0:0:0: CD-ROM            HL-DT-ST DVD-ROM DH10N    0F03 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg0 type 5
random: nonblocking pool is initialized
qla2xxx [0000:01:00.0]-8038:0: Cable is unplugged...
qla2xxx [0000:01:00.1]-8038:7: Cable is unplugged...
scsi8 : ioc0: LSISAS1068E B3, FwRev=00192f00h, Ports=1, MaxQ=266, IRQ=16
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 9, phy 0, sas_addr 0x5000c5000f1430b5
scsi 8:0:0:0: Direct-Access     SEAGATE  ST373455SS       S52C PQ: 0 ANSI: 5
scsi 8:0:0:0: Attached scsi generic sg1 type 0
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 1, phy 1, sas_addr 0x5000c5000f508c91
scsi 8:0:1:0: Direct-Access     SEAGATE  ST373455SS       S52C PQ: 0 ANSI: 5
scsi 8:0:1:0: Attached scsi generic sg2 type 0
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 2, phy 2, sas_addr 0x5000c500058d7ad5
scsi 8:0:2:0: Direct-Access     SEAGATE  ST373455SS       S513 PQ: 0 ANSI: 5
scsi 8:0:2:0: Attached scsi generic sg3 type 0
mptsas: ioc0: attaching raid volume, channel 1, id 0
scsi 8:1:0:0: Direct-Access     Dell     VIRTUAL DISK     1028 PQ: 0 ANSI: 5
sd 8:1:0:0: Attached scsi generic sg4 type 0
sd 8:1:0:0: [sda] 426246144 512-byte logical blocks: (218 GB/203 GiB)
sd 8:1:0:0: [sda] Write Protect is off
sd 8:1:0:0: [sda] Mode Sense: 03 00 00 08
sd 8:1:0:0: [sda] No Caching mode page found
sd 8:1:0:0: [sda] Assuming drive cache: write through
 sda: sda1 sda2
sd 8:1:0:0: [sda] Attached SCSI disk
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
EXT4-fs (sda1): orphan cleanup on readonly fs
EXT4-fs (sda1): 1 orphan inode deleted
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
ERST: NVRAM ERST Log Address Range not implemented yet.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-udevd[387]: starting version 204
lp: driver loaded but no devices found
ACPI Error: No handler for Region [IPMI] (ffff88013ac23240) [IPMI] (20140424/evregion-163)
ACPI Error: Region IPMI (ID=7) has no handler (20140424/exfldio-297)
ACPI Error: Method parse/execution failed [\_SB_.PMI0._GHL] (Node ffff88013ac22c58), AE_NOT_EXIST (20140424/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.PMI0._PMC] (Node ffff88013ac22bb8), AE_NOT_EXIST (20140424/psparse-536)
ACPI Exception: AE_NOT_EXIST, Evaluating _PMC (20140424/power_meter-755)
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
ipmi message handler version 39.2
EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
EDAC i7core: Driver loaded, 1 memory controller(s) found.
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
gpio_ich: GPIO from 180 to 255 on gpio_ich
ipmi device interface
ipmi_si ipmi_si.0: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20)
ipmi_si ipmi_si.0: IPMI kcs interface initialized
audit: type=1400 audit(1439552881.114:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=501 comm="apparmor_parser"
audit: type=1400 audit(1439552881.114:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=501 comm="apparmor_parser"
audit: type=1400 audit(1439552881.114:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=501 comm="apparmor_parser"
audit: type=1400 audit(1439552881.114:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=485 comm="apparmor_parser"
audit: type=1400 audit(1439552881.114:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=485 comm="apparmor_parser"
audit: type=1400 audit(1439552881.114:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=485 comm="apparmor_parser"
audit: type=1400 audit(1439552881.114:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=499 comm="apparmor_parser"
audit: type=1400 audit(1439552881.114:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=499 comm="apparmor_parser"
audit: type=1400 audit(1439552881.114:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=499 comm="apparmor_parser"
tg3 0000:04:00.0: irq 73 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
tg3 0000:04:00.0 em1: Link is up at 1000 Mbps, full duplex
tg3 0000:04:00.0 em1: Flow control is on for TX and on for RX
IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
init: failsafe main process (550) killed by TERM signal
init: plymouth-upstart-bridge main process ended, respawning
perf interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
init: upstart-udev-bridge main process (376) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-file-bridge main process (454) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-socket-bridge main process (618) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: cron main process (990) killed by TERM signal
show_signal_msg: 66 callbacks suppressed
conftest[17219]: segfault at 0 ip 00000000004005c0 sp 00007ffc79b04cb0 error 4 in conftest[400000+1000]
conftest[17248]: segfault at 0 ip 00007f000fcb3216 sp 00007ffcbd410ab8 error 4 in libc-2.19.so[7f000fb73000+1bb000]

Return To VIRTUAL DISK - 2048 MB DDR3-1333MHz System Information